Priming evercare® inLine, vented with semigrid container or bag

Priming recommendation to prime evercare® inLine infusion set when using semirigid container or infusion bag.
1

Step 1

Unwrap the IV-set and check whether the air vent cap is closed and the roller clamp is open.
2

Step 2

Change position of the roller clamp and control that the tubing is unaffected and close it.
3

Step 3

Spike the semirigid bag/container. Invert the bag/container and hang it from the IV pole or similar.
4

Step 4

Attach the tubing to the tube holder at the roller clamp.
5

Step 5

Squeeze gently the drip chamber 3-5 times to fill half of the drip chamber (too aggressive squeeze can lead to mixed air fluid below the drip chamber).
6

Step 6

Open the roller clamp until the complete tubing is primed.
7

Step 7

Closed the roller camp.

Additional information

Here you can find related products and PDF for download.


Products

10499 ,10500-0110502-0110503-0110570-0110504-0110506-0110577-0110578-0110579-0110580-0110581-0110582-0210585-0210590105911070010702107031070410705107061070710708107091071010711

 

Download PDF

Please note!

See the package for complete IFU instructions for use, this is only a guide for users

DO NOT OVER-TIGHTEN connections. DO NOT USE any instruments to tighten connections

Tip: Glass and non fully collapsible containers: Keep the vent closed during spiking and priming. Only open the vent flap when venting is required.

 

How to prime evercare® inLine, vented with container or bag